# 4s earrings with holes

**URL:** <https://community.cookiecad.com/t/4s-earrings-with-holes/595>\
**Category:** Share your Designs\
**Created:** [December 26, 2021, 4:54pm UTC](https://community.cookiecad.com/t/4s-earrings-with-holes/595 "2021-12-26T16:54:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [December 26, 2021, 4:54pm UTC](https://community.cookiecad.com/t/4s-earrings-with-holes/595/1 "2021-12-26T16:54:01Z")

</div>

I suggest using Imprint cutter/edges only if you would like to have an imprint where to make your hole. I used a center bar horizontal and vertical.  
 ![s-es with holes](https://community.cookiecad.com/uploads/default/original/1X/6b6471cc7730be6b4513f095176ff59946c1df70.png)

---

<div class="post-metadata">

**Author:** ![skshah](https://community.cookiecad.com/user_avatar/community.cookiecad.com/skshah/32/281_2.png) [@skshah](https://community.cookiecad.com/u/skshah)\
**Post date:** [January 22, 2022, 7:10pm UTC](https://community.cookiecad.com/t/4s-earrings-with-holes/595/2 "2022-01-22T19:10:03Z")

</div>

Can you please share your setting, I don’t seem to get the results. Thanks

---

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [January 23, 2022, 8:30am UTC](https://community.cookiecad.com/t/4s-earrings-with-holes/595/3 "2022-01-23T08:30:44Z")

</div>

Settings for the slicer? These are my current settings in Cura  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/d16aac4c7f31e6e0bc28d7ad074e424e47bc95b5.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/d459d9a7310930f2da3f9b9c8f4ee6916c51e5bd.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/fdb987fe43d1984e6b0b58e3f0780419ad879891.png)

---

<div class="post-metadata">

**Author:** ![skshah](https://community.cookiecad.com/user_avatar/community.cookiecad.com/skshah/32/281_2.png) [@skshah](https://community.cookiecad.com/u/skshah)\
**Post date:** [January 29, 2022, 3:16am UTC](https://community.cookiecad.com/t/4s-earrings-with-holes/595/4 "2022-01-29T03:16:31Z")

</div>

Thank you so much for replying I should have mentioned I was referring to the cookie cad settings. Thanks so much for the trouble with these settings.