# Base no longer removable **URL:** \ **Category:** 3D Printing\ **Created:** [June 30, 2024, 5:22pm UTC](https://community.cookiecad.com/t/base-no-longer-removable/2122 "2024-06-30T17:22:27Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kruegerco](https://community.cookiecad.com/user_avatar/community.cookiecad.com/kruegerco/32/1795_2.png) [@kruegerco](https://community.cookiecad.com/u/kruegerco)\ **Post date:** [June 30, 2024, 5:22pm UTC](https://community.cookiecad.com/t/base-no-longer-removable/2122/1 "2024-06-30T17:22:27Z")
I am no longer able to strip off the base from the cookie cutter. It used to come off easily, but now is fused to the cookie cutter and I can’t get it off. I have not changed any settings. ![cutter](https://community.cookiecad.com/uploads/default/original/2X/a/a8dffc858f76cd97d872067ef7df0a459314b3bc.jpeg) Creality 10 mini. ---
**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\ **Post date:** [July 8, 2024, 1:45pm UTC](https://community.cookiecad.com/t/base-no-longer-removable/2122/2 "2024-07-08T13:45:39Z")
If you haven’t changed settings, then it is likely something on the printer. Printing a little low would be my initial guess. However, the raft shouldn’t really be necessary. I would recommend you try printing without it. ---
**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\ **Post date:** [September 19, 2024, 8:37pm UTC](https://community.cookiecad.com/t/base-no-longer-removable/2122/3 "2024-09-19T20:37:28Z")
It looks like you have a raft or brim turned on in your slicer. You shouldn’t need that for cutters - try turning that feature off in the slicer.