# Cut lines on the inside AND outside of a circle?

**URL:** <https://community.cookiecad.com/t/cut-lines-on-the-inside-and-outside-of-a-circle/907>\
**Category:** Cookiecad\
**Created:** [April 21, 2022, 10:46am UTC](https://community.cookiecad.com/t/cut-lines-on-the-inside-and-outside-of-a-circle/907 "2022-04-21T10:46:19Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\
**Post date:** [April 25, 2022, 7:45pm UTC](https://community.cookiecad.com/t/cut-lines-on-the-inside-and-outside-of-a-circle/907/2 "2022-04-25T19:45:33Z")

</div>

Hi,

If you want to cut and imprint you would need to make two separate pieces. You can make a cutter that cuts both the outside and inside (see: [How to create a 3d printed doughnut cutter with center cut out using Cookiecad](http://community.cookiecad.com/t/how-to-create-a-3d-printed-doughnut-cutter-with-center-cut-out-using-cookiecad/88)) but it can’t also have an imprint. So for the imprint you can just make a separate stamp.

---

_[View the full topic](https://community.cookiecad.com/t/cut-lines-on-the-inside-and-outside-of-a-circle/907)._