# Cutter / marker separately

**URL:** <https://community.cookiecad.com/t/cutter-marker-separately/53>\
**Category:** Cookiecad\
**Created:** [June 1, 2021, 5:46pm UTC](https://community.cookiecad.com/t/cutter-marker-separately/53 "2021-06-01T17:46:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![francisco.aguilar19](https://community.cookiecad.com/user_avatar/community.cookiecad.com/francisco.aguilar19/32/50_2.png) [@francisco.aguilar19](https://community.cookiecad.com/u/francisco.aguilar19)\
**Post date:** [June 1, 2021, 5:46pm UTC](https://community.cookiecad.com/t/cutter-marker-separately/53/1 "2021-06-01T17:46:22Z")

</div>

Hi,  
how can I design the cutter and marker separately?  
When I apply the imprint / stamp option, the outline still appears

---

<div class="post-metadata">

**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\
**Post date:** [June 1, 2021, 9:42pm UTC](https://community.cookiecad.com/t/cutter-marker-separately/53/2 "2021-06-01T21:42:13Z")

</div>

We are about to release a two piece cutter / stamp feature! If you want early access chat with us directly.

---

<div class="post-metadata">

**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\
**Post date:** [June 7, 2021, 11:01pm UTC](https://community.cookiecad.com/t/cutter-marker-separately/53/3 "2021-06-07T23:01:03Z")

</div>

The [cutter + stamp feature](http://community.cookiecad.com/t/new-feature-two-part-cutter-stamp-embossers-debossers/66) is live. You can also [remove the outer edge](http://community.cookiecad.com/t/how-to-create-a-3d-printed-text-embosser-debosser/90) if your image has a separate outline.