# Erasing interior parts of cutter

**URL:** <https://community.cookiecad.com/t/erasing-interior-parts-of-cutter/2951>\
**Category:** Uncategorized\
**Created:** [April 13, 2026, 3:13am UTC](https://community.cookiecad.com/t/erasing-interior-parts-of-cutter/2951 "2026-04-13T03:13:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![GilmoreRus](https://community.cookiecad.com/user_avatar/community.cookiecad.com/gilmorerus/32/2096_2.png) [@GilmoreRus](https://community.cookiecad.com/u/GilmoreRus)\
**Post date:** [April 13, 2026, 3:13am UTC](https://community.cookiecad.com/t/erasing-interior-parts-of-cutter/2951/1 "2026-04-13T03:13:49Z")

</div>

How do I erase parts of the interior

of a design for a cutter (thin parts

that would not produce a good cut).

Essentially I just want the outline only.

I tried the erase tool in Cadit in editing

and it didn’t respond as one would normally expect that tool to do.

Thank you.

---

<div class="post-metadata">

**Author:** ![bart.moyaers](https://community.cookiecad.com/letter_avatar_proxy/v4/letter/b/bbe5ce/32.png) [@bart.moyaers](https://community.cookiecad.com/u/bart.moyaers)\
**Post date:** [April 13, 2026, 10:19am UTC](https://community.cookiecad.com/t/erasing-interior-parts-of-cutter/2951/2 "2026-04-13T10:19:30Z")

</div>

Hi.

Could you perhaps share the image / cutter in question?

What does not work well with the erase tool? Perhaps add some screenshots if you’d like, that could make it more clear what the issue is exactly.

Happy to help you further once I have some more information.

---

<div class="post-metadata">

**Author:** ![amberderose81](https://community.cookiecad.com/user_avatar/community.cookiecad.com/amberderose81/32/2023_2.png) [@amberderose81](https://community.cookiecad.com/u/amberderose81)\
**Post date:** [April 17, 2026, 1:08am UTC](https://community.cookiecad.com/t/erasing-interior-parts-of-cutter/2951/3 "2026-04-17T01:08:37Z")

</div>

Change it to cookie cutter and adjust the size to what you need.
