# Feature Request: Donut Imprint Cutter **URL:** \ **Category:** Uncategorized\ **Created:** [September 4, 2022, 4:55pm UTC](https://community.cookiecad.com/t/feature-request-donut-imprint-cutter/1085 "2022-09-04T16:55:55Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kimartin1312](https://community.cookiecad.com/user_avatar/community.cookiecad.com/kimartin1312/32/1095_2.png) [@kimartin1312](https://community.cookiecad.com/u/kimartin1312)\ **Post date:** [September 4, 2022, 4:55pm UTC](https://community.cookiecad.com/t/feature-request-donut-imprint-cutter/1085/1 "2022-09-04T16:55:56Z")
Hi, I am new in the community so please let me know if I posted this in the wrong category or something. I use cookiecad a lot for designing clay cutters. I can design donut cutters easily by using an outer shape and an inner shape then adding center bars to the design. However, if I have an imprint kind of design with a closed shape in the center then sometimes I need to make that as cutting edge too. Can something be done about it? Thanks! ---
**Author:** ![theclayfiles](https://community.cookiecad.com/user_avatar/community.cookiecad.com/theclayfiles/32/1613_2.png) [@theclayfiles](https://community.cookiecad.com/u/theclayfiles)\ **Post date:** [June 20, 2023, 11:42am UTC](https://community.cookiecad.com/t/feature-request-donut-imprint-cutter/1085/2 "2023-06-20T11:42:49Z")
+1 I would love to be able to create an imprint cutter w/ a center cut. ![Screenshot 2023-06-20 at 4.41.04 AM](https://community.cookiecad.com/uploads/default/original/2X/c/c05b32c8bd9468702f28e46a1414b58b64f22faa.png) ---
**Author:** ![thingscrafty](https://community.cookiecad.com/user_avatar/community.cookiecad.com/thingscrafty/32/1973_2.png) [@thingscrafty](https://community.cookiecad.com/u/thingscrafty)\ **Post date:** [January 3, 2026, 2:12pm UTC](https://community.cookiecad.com/t/feature-request-donut-imprint-cutter/1085/3 "2026-01-03T14:12:06Z")
Any motion on this? It’s a really important feature.