# Help wirh cura profile!

**URL:** <https://community.cookiecad.com/t/help-wirh-cura-profile/1396>\
**Category:** 3D Printing\
**Created:** [March 22, 2023, 10:14pm UTC](https://community.cookiecad.com/t/help-wirh-cura-profile/1396 "2023-03-22T22:14:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![carmelastabile](https://community.cookiecad.com/user_avatar/community.cookiecad.com/carmelastabile/32/632_2.png) [@carmelastabile](https://community.cookiecad.com/u/carmelastabile)\
**Post date:** [March 22, 2023, 10:14pm UTC](https://community.cookiecad.com/t/help-wirh-cura-profile/1396/1 "2023-03-22T22:14:06Z")

</div>

Hi everyone!  
After a lot of attempts i founded my perfect cura profile for clay cutters! My cutters were Sharp, no stringing and perfect walls.  
Since i uploaded to cura 5 i have a lot of problems, expecially with detailed imprint cutters, sometimes there are a lot of stringing, sometimes i have Little holes in the extra Blade and sometimes my noozle extrude too much pla. I have and ender 3 pro.  
I tried eveything, setting temperature from 205 to 215, changing retraction Speed and distanze, changing print Speed… I don’t know what to do anymore! Since i’ve cura 5 i have a lot of different problems ( i use Always the same pla).  
Can anybody share a cura 5 profile thant works well with imprint cutter?  
Thank you so much for your help!
