# Inner cutting edge

**URL:** <https://community.cookiecad.com/t/inner-cutting-edge/1149>\
**Category:** Cookiecad\
**Created:** [October 24, 2022, 4:45pm UTC](https://community.cookiecad.com/t/inner-cutting-edge/1149 "2022-10-24T16:45:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![acstumpf83](https://community.cookiecad.com/user_avatar/community.cookiecad.com/acstumpf83/32/1151_2.png) [@acstumpf83](https://community.cookiecad.com/u/acstumpf83)\
**Post date:** [October 24, 2022, 4:45pm UTC](https://community.cookiecad.com/t/inner-cutting-edge/1149/1 "2022-10-24T16:45:52Z")

</div>

I am trying to create a wreath cutter, but cannot figure out how to generate the inner cutting edge so that the center section is cut out.

 ![Screen Shot 2022-10-24 at 11.45.20 AM](https://community.cookiecad.com/uploads/default/original/2X/0/0f8eb61db2fc409e6c3c7397abd3b129d467e41c.png)

---

<div class="post-metadata">

**Author:** ![NApter](https://community.cookiecad.com/user_avatar/community.cookiecad.com/napter/32/1936_2.png) [@NApter](https://community.cookiecad.com/u/NApter)\
**Post date:** [October 25, 2022, 6:36pm UTC](https://community.cookiecad.com/t/inner-cutting-edge/1149/2 "2022-10-25T18:36:18Z")

</div>

To make the imprint reach the edge set “imprint depth” to 0. The interior feature thickness will match the line thickness in the image. You can use the “experimental settings → thicken interior features” with a positive number to increase the thickness and a negative number to decrease it.

The inner holes in this model are quite small and may be difficult to cut.