# Perfect Cutters (My Slicer Settings)

**URL:** <https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629>\
**Category:** 3D Printing\
**Created:** [January 5, 2022, 5:24am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629 "2022-01-05T05:24:39Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [January 5, 2022, 5:24am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/1 "2022-01-05T05:24:39Z")

</div>

These are the settings I use to print with the default CookieCAD STL settings. They have been coming out perfect. Nice & Sturdy

 ![image](https://community.cookiecad.com/uploads/default/original/1X/dca3966e8114f1cbee21c28398e3154768b0223a.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/6855dd33c2e72ca8c733609a326d7fe32a2d05a5.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/de1b58194cff0546a0ea9496b4b9d40e02e0eaad.png)

---

<div class="post-metadata">

**Author:** ![jonilmasepulveda1](https://community.cookiecad.com/user_avatar/community.cookiecad.com/jonilmasepulveda1/32/674_2.png) [@jonilmasepulveda1](https://community.cookiecad.com/u/jonilmasepulveda1)\
**Post date:** [January 8, 2022, 1:11am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/2 "2022-01-08T01:11:56Z")

</div>

Settings for what slicer?

---

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [January 8, 2022, 3:23am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/3 "2022-01-08T03:23:11Z")

</div>

I have an Alta - which uses Silhouette 3D. But you can try the settings in any slicer and customize it if you have any issues with the print.

---

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [January 23, 2022, 8:56am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/4 "2022-01-23T08:56:30Z")

</div>

Now that I am using Cura as a slicer - I found even better settings - making PERFECTO COOKIE CUTTERS  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/d247e6229747f53234bd1454252667b03d134599.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/7ee3adc4da9c5cfa4a93c8c2fa945f5af1a0321a.png)  
 ![image](https://community.cookiecad.com/uploads/default/original/1X/a3db9bf1f7c0c12c599130723ab635b8b2aca0ea.png)

FYI - for my blade I use .4 or .6, .8 seems to be too thick for me. I cut clay not cookies…

---

<div class="post-metadata">

**Author:** ![btt](https://community.cookiecad.com/user_avatar/community.cookiecad.com/btt/32/854_2.png) [@btt](https://community.cookiecad.com/u/btt)\
**Post date:** [February 28, 2022, 3:31am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/5 "2022-02-28T03:31:59Z")

</div>

do your clay cutters come out sharp?

---

<div class="post-metadata">

**Author:** ![sucorra](https://community.cookiecad.com/user_avatar/community.cookiecad.com/sucorra/32/490_2.png) [@sucorra](https://community.cookiecad.com/u/sucorra)\
**Post date:** [March 3, 2022, 11:43pm UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/6 "2022-03-03T23:43:17Z")

</div>

Yes they do print sharp. I usually clean the edges up with a bit of acetone to make sure it is really smooth

---

<div class="post-metadata">

**Author:** ![thecakebymildred](https://community.cookiecad.com/user_avatar/community.cookiecad.com/thecakebymildred/32/1040_2.png) [@thecakebymildred](https://community.cookiecad.com/u/thecakebymildred)\
**Post date:** [August 4, 2022, 1:48am UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/7 "2022-08-04T01:48:59Z")

</div>

Trying these settings. This is driving me crazy!

---

<div class="post-metadata">

**Author:** ![FableJ](https://community.cookiecad.com/user_avatar/community.cookiecad.com/fablej/32/2141_2.png) [@FableJ](https://community.cookiecad.com/u/FableJ)\
**Post date:** [January 22, 2024, 4:33pm UTC](https://community.cookiecad.com/t/perfect-cutters-my-slicer-settings/629/8 "2024-01-22T16:33:36Z")

</div>

Are these for imprint cutters as I’m having a nightmare with cura not filling gaps and creating spaces.