# Stamps not detaching from Cutter **URL:** \ **Category:** Uncategorized\ **Created:** [August 16, 2022, 3:34am UTC](https://community.cookiecad.com/t/stamps-not-detaching-from-cutter/1059 "2022-08-16T03:34:51Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![samadabee](https://community.cookiecad.com/user_avatar/community.cookiecad.com/samadabee/32/1072_2.png) [@samadabee](https://community.cookiecad.com/u/samadabee)\ **Post date:** [August 16, 2022, 3:34am UTC](https://community.cookiecad.com/t/stamps-not-detaching-from-cutter/1059/1 "2022-08-16T03:34:52Z")
Hello there, I’ve printed before with no issues. (cutter & stamp) but for some reason the last 4 times I’m having an issue where my stamps wont detach from the cutter its self! I even tried playing around with the settings on cookie cad but still had the same issue with the stamps not detaching from the cutter itself. When I had done the same settings for a peppa pig one and it worked perfectly fine before. Please help 😃 ![unnamed (2)](https://community.cookiecad.com/uploads/default/original/2X/3/3a67c2ee97e2ffe925dbe464fdc06e6d9d3d5b37.jpeg) ---
**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\ **Post date:** [August 18, 2022, 7:46am UTC](https://community.cookiecad.com/t/stamps-not-detaching-from-cutter/1059/2 "2022-08-18T07:46:05Z")
It is might be because you are printing too close to the bed - so the filament squishes out and the cutter and stamp get connected. To fix this you can either: - Adjust the bed so the nozzle is a little further away. - Increase the cutter/stamp gap in cookiecad - if the gap is big enough they won’t fuse - Print them separately rather than one inside the other - to do that in prusa slicer you can click split objects, to do that in cura install the mesh tools plugin. However - looking closer, you might have turned on brim or raft in your slicer. Make sure those are off.