# Two-part cutter

**URL:** <https://community.cookiecad.com/t/two-part-cutter/324>\
**Category:** Cookiecad\
**Created:** [September 12, 2021, 2:16pm UTC](https://community.cookiecad.com/t/two-part-cutter/324 "2021-09-12T14:16:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rofava](https://community.cookiecad.com/user_avatar/community.cookiecad.com/rofava/32/335_2.png) [@rofava](https://community.cookiecad.com/u/rofava)\
**Post date:** [September 12, 2021, 2:16pm UTC](https://community.cookiecad.com/t/two-part-cutter/324/1 "2021-09-12T14:16:44Z")

</div>

Is there any specific measure for the cutter and for the stamp? I ask this question because I have cutters+stamp ing one with the 13 cm cutter and the 11cm stamp and another cutter 12 cm high and the stamp with 4 cm, so I don’t know what would be the correct measure to make my cutter and stamp.  
TK.

---

<div class="post-metadata">

**Author:** ![CookiecadNathan](https://community.cookiecad.com/user_avatar/community.cookiecad.com/cookiecadnathan/32/145_2.png) [@CookiecadNathan](https://community.cookiecad.com/u/CookiecadNathan)\
**Post date:** [September 12, 2021, 4:43pm UTC](https://community.cookiecad.com/t/two-part-cutter/324/2 "2021-09-12T16:43:53Z")

</div>

Hi, it’s really up to you and what you like best. I would recommend you start with the defaults and then change it, if you find you prefer a different setting.
