ABC
October 15, 2022, 5:18am
1
Hello there
I was wondering if this is possible:
I’m needing the overlap between the 8 and the 0 to be an embosser and not a cutter.And the two holes to be a cutter. (See below example) Deleting outer edge also deletes the overlap between (not sure if this is a bug) Any help would be much appreciated!
https://master.cookiecad.com/?settings={"purchaseSize"%3A3,"cutterSize"%3A75,"sizeType"%3A"longest","interiorType"%3A"imprint","imprintDepth"%3A4.5,"bladeDepth"%3A12.5,"bladeThickness"%3A0.8,"extraBladeDepth"%3A11.9,"extraBladeThickness"%3A0,"baseHeight"%3A3.5,"baseWidth"%3A4,"horizontalBarWidth"%3A0,"verticalBarWidth"%3A0,"units"%3A"mm","invertInterior"%3Afalse,"offsetIn"%3Afalse,"offsetInner"%3A0,"forceSolidBar"%3Afalse,"mirror"%3Afalse,"removeImprintBase"%3Afalse,"stampCutterTolerance"%3A0.9,"stampBackHeight"%3A4.5,"stampImprintHeight"%3A3,"deleteOuterPath"%3Afalse,"cutterSet"%3Afalse,"userSize"%3A75,"currentStlOutputFile"%3A"14976b9305c14a8da1e2cd606d4453ce%2050W%20V8.stl","name"%3A"80"}
NApter
November 3, 2022, 5:01am
2
Hi!
I would suggest you make one stamp and one cutter. For the cutter, use a filled in image like so:
Then select imprint cutter and check edges only.
For the stamp you can use the original image, or you can modify it so it doesn’t have the holes. Then use the cutter to cut and the stamp to imprint.
