Can cookiecad make like this stamp?
Because cookiecad make like this
That cutter you show looks like a cutout not a stamp. A stamp is for embossing or debossing but not for cutting out pieces.
To make a cutout follow this guide: How to create a 3d printed doughnut cutter with center cut out using Cookiecad
1 Like
Use the Imprint Cutter setting with Edges Only selected to get something like this. If you have a large Handle Width (3.5mm) the pieces will all be joined into one cutter, but if you make the Handle Width small (1mm) it will keep the pieces separate so you can use each cutter with a different color fondant. Without the handle the cutter will be fragile but if you are carful it will work. If you have a photo editing program you could also isolate the different parts and make individual cutters for each part.
1 Like
Carol have you done this method with no handle to make multi-cutters?
1 Like
@CookiecadNathan Yes. I made this batman set, minnie set, and hogwarts shield set. I do the edges only and make the handle really small so the pieces don’t link together. If they do link a bit, I just cut them apart.
3 Likes