Number wall and height layer

3D Printing
#1

What do you think is the optimal layer height? I’m using 0.28 and I wouldn’t want it to be correct.
How many perimeters do you use?

#2

I use PrusaSlicer

  • 0.44 external perimeters
  • 0.32 layer height
  • 1 perimeter with “detect thin walls” enabled so it actually prints only 1 wall for the cutting blade.
  • 1 top 1 bot
  • 40% infill at 30mm/s
  • 0,2 “retract restart extra”

Not printing much cookie cutters nowadays but they used to come perfect with that configuration

#3

Hi! It depends on what you’re going for. 0.28 will print faster, 0.1 will allow for more detail like words on the wall. You have a rapid prototyper! Try both and see which you like.

#4

Thanks. Is this configuration for only blade? Or even for imprint?

#5

Works with everything, “detect thin walls” will only do 1 perimeter when the blade is 0.4mm in the 3d model, otherwise it will do 2 or more especially when “extra perimeters if needed” is also enabled.